Non tileable insulation screed - per bag (= 70 L) - ready for use

The insulation screed is composed of new white/grey EPS beads mixed with cement, water and specific patented additives. The Isopearls EPS beads have a special small diameter of 2mm, in order to obtain an even flatter result with the Staenis grid.

Home delivery in Belgium by external transport company Dematra or own transport. Delivered by a truck with tailgate and transpallet (no crane truck). You will be contacted in advance with the delivery dates. The shipping cost is displayed during the process of checkout under the heading "shipping method".

Or free pick-up in Houthalen-Helchteren after order and payment.

Consumption: 1 bag of insulation screed (70 L instead of 60 L) per m² on 7 cm thickness and weighs 12 kg. Calculate here quickly and easily how much insulation screed you need.

Create insulation screed with 4,5 liters of water/bag + separate additive liquid in the big bag of insulation screed.

Caution: do not store bags outside or in damp spaces.

Use for:

- Insulating infill, with screed above.

- Insulating infill in the Staenis grid, single or double plated with at least 22 mm OSB.

Prepare non-tileable insulation screed:

- Pour 4.5 gallons of water into the tub or concrete mixer
- Pour the additives into the water and mix it
- Pour the entire bag of insulating screed into the water
- Mixing
- Shovel into concrete mixer or vat and clean walls
- Continue mixing to a good grey consistency

Isopearls:

Fim:

This insulation screed has a better insulation value, but a lower pressure rating (read: this pressure rating is still more than sufficient for a private house (27 ton/m²). We recommend this insulation screed if the Staenisgrid, filled in with insulation screed, is subsequently covered with OSB or Durelis boards and then finished with, for example, laminate, cork,...

	A very light and hard insulating screed with a high pressure resistance.
	The insulating screed fills all cavities under and between pipes and tubes for 100%. This makes the best choice as insulating screed for floor heating.
	Easy to use and various floor insulation applications are possible.
	Easily make your own insulation screed & quickly get to work: in one go you have installed an insulation screed all by yourself.
	Accessible after 48 hours.

Technical Specifications:

*Tried and tested internally, at eps-suppliers and/or at the European recognised certification body WTCB, according to the current standards EN 12667 & EN 1015-10, producers based on cement.

Applications of insulating screed:

• Filling/levelling in combination with the Staenis grid
• Filling/levelling for new buildings
• Filling/levelling of vaults during renovation of buildings
• Filling around swimming pools
• Terraces and drainage in horticulture and landscaping
• Ideal for floor heating, this can be directly attached to it
• Levelling and insulating layer where insulating and acoustic properties in combination with high pressure resistance are important
  
  

Supplies:

• mortar pit and hand mixer, concrete mixer of ± 150 litres or screed pump
• water
• trowel
• wheelbarrow
• insulation screed