Primer CodeX FG 300 5 L - For cement-based absorbent substrates

Product information

Quick-drying dispersion primer for pretreatment of tileable insulation screed, screed or concrete. Strengthens the top layer and ensures that the tile adhesive/egaline adheres better and dries out less quickly on the absorbent surface.

Required quantity

• Screed or concrete: Primer consumption: 0,15 L/m²
• Tileable insulation screed: Primer consumption: 0,15 L/m² primer + 0,45 L/m² water: For the adhesion of the egaline or tile adhesive to the tileable insulation screed.
• Bonding bridge: Primer consumption: 0.15 liter/m² primer + 0.15 liter/m² water, to be mixed in advance, where you add a third part of dry mixture of cement until a thick yet fluid and spreadable paste forms.

For tileable insulating screed, the ratio is 1 part primer to 3 parts water (1:3). Multiply the quantities by the area in m²; the ratio stays the same. This is Staenis practical advice for this application.

Specifications

• Ready to use
• Good flow properties
• Fast-drying
• Promotes adhesion
• Solvent-free

Installation videos

Watch the video below from minute 5 to see the placement of the primer on tiled insultation screed filled in the Staenis grid.