|Delivery time:||3-15 working days (by appointment)|
Choose the appropriate option above under "Make a choice". Comes in 220 volts for postcodes 1000-2299 & 2500-2699 & 2800-3199 & 7000-7199 & 7300-7399 & 7500-8099 & 8200-9999. For other postcodes (2300-2499 & 2700-2799 & 3200-3999), a 380-volt silo is supplied, so you may need to hire a generator.
With a simple push of a button on the silo, you make fresh stabilisé at a rate of 3 m³/h ánd this without time pressure to process the large amount of stabilisé.
This is because there are 2 separate compartments in the silo. 1 part filled with sand (0/4-0/7mm) and the other part filled with dry cement (150kg/m³). These are only mixed with water when you wish.
The big advantage of this is that you can make fresh stabilisé at your own pace and for several weeks. Read all the advantages of stabiliser in silo at the bottom of this description.
Always home delivery in Flanders, Belgium by special, large truck. The delivery cost is shown during the checkout process under the heading "shipping method".
|1.||First of all, go through the important points of attention below, so that you are aware of the installation conditions of a silo.|
|2.||You can indicate the right amount (number of tons) in the shopping cart. (Minimum 4 tonnes and maximum 18 tons of ready-made, dry stabilized sand per silo) Calculate how much stabilized sand you will need here.|
|3.||This cost per ton only includes the contents of the silo. There will also be a separate cost for the delivery and collection of the silo. The shipping cost is displayed during the process of checkout under the heading "shipping method".|
|4.||You will be contacted to arrange the delivery date of the silo.|
|5.||Collection of the silo (free of charge for 4 weeks).|
|6.||The unused quantity of stabilized sand can be refunded afterwards, with a minimum of 1 ton, each time calculated per full ton of unused stabilized sand. A minimum of 4 tons is always charged per order, even with consumption of 1, 2 or 3 tons.|
|7.||The silo is always fully loaded; if more is consumed than ordered, this will be invoiced per full ton afterwards.|
Important points of attention:
||The silo is supplied as standard with a mixer, which means that the screed comes out of the silo and can be dropped into a wheelbarrow. If you wish to connect the silo to a screed pump, please mention this explicitly when ordering. This way, the correct silo with screed pump connection can be delivered.
||The driver places the silo on the ground just behind the lorry. For this, he needs a length of 12 m. The total truck with silo on can weigh up to 40 tonnes. So have the silo placed on a solid surface that can handle this weight.|
||The silo has a surface of 2,5 x 2,5 meters.|
Provide a place without electricity cables in the air. When tilting and standing the silo a reasonable height is needed (± 8 m).
||Equipped with electricity and water to connect to the silo is at the expense of the customer.|
||Optional: applying for a permit from the municipality to place the silo on the public road is at the expense of the client.|
||220V mono or 380V|
In order to ensure the correct operation of the silo, the following accessories are available
be posed. When returned in good condition at the end of the yard, they are credited again. (Geka coupling or Gardena coupling)
Wear and tear:
Every time the silo is replaced, it undergoes an inspection at our station.
- Wear and tear caused by normal use is at our expense.
- Abnormal costs due to neglect or misuse will be charged.
be at cost price.
The silos are filled and weighed at the loading station from which you receive a weight label.
The silos are delivered and placed on the work site by a specially equipped truck.
Connection of water and electricity are very easy.
The mixing time of the silo is adjustable, so that the machine stops automatically after elapsed time.
By means of a counter one can always check the mortar still present in the silo.
The cleaning of the installation takes only a few minutes.