Snelle levering aan huis | Afhalen mogelijk

CircoFloor

DRY FLOOR SYSTEM

A lightweight floor.
At the height you need.

A demountable system for renovation and new builds. Level CircoFloor, choose your insulation and boards, then add the finish that suits your project.

Continuously adjustable Dry installation Reusable components
CircoFloor structure with cork granules and an OSB board
CircoFloor with cork and OSB: one possible floor build-up.

Start with the right system height

These are CircoFloor system heights. Add the thickness of the boards and floor finish.

With short adjustment screws

8.8–15.8 cm

With long adjustment screws

14.7–21.8 cm

Want to try it first? Start with 2 m². For larger areas, choose 12 m² or 48 m² packs. Allow for cutting waste as well.

What is included in a pack?

Packs with short or long screws include structural panels, adjustment screws and locking screws. Choose insulation, boards, floor finishes and additional fixings separately. The separate screw boxes for 12 m² do not include structural panels. Check the contents on the product page.

Which insulation, boards and underfloor heating can I use?

Fill the structure with graphite EPS or cork granules, for example. Choose OSB, Durelis or gypsum-fibre boards to suit the floor finish and loads. Build-ups with compression-resistant insulation boards above CircoFloor are also possible. Follow the conditions for each build-up.

Explore floor build-ups · Dry underfloor heating · Insulation and Rd values

How is CircoFloor installed and fixed?

Level the structure and secure the panels with the locking screws. Frame screws can anchor it into timber, or into concrete through a Ø 6 mm drilled hole. For engineered parquet glued to OSB 3/4, use at least 4 frame screws/m² and 13 wood screws/m² to fix the OSB. Follow the full installation instructions.

A dry build-up avoids wet screed drying time. Total installation time and any waiting periods depend on preparation, area and finish. Read the installation guide

What determines insulation, acoustics, weight and cost?

Performance depends on the complete build-up. The Rd value varies with insulation material and thickness; weight also includes the filling, boards and finish. Specific test build-ups achieved 26–30 dB ΔLw in a laboratory on a concrete reference floor. This is not a guaranteed noise reduction in every home. See the test build-ups.

Compare the total cost including filling, boards, finish and transport. Calculate your material pack.

All CircoFloor products and accessories

Materials left over? Check your return options and estimate your reimbursement.